When to choose CNC turning

  1. Home
  2. / When to choose CNC turning

When should CNC turning (CNC lathe) be the preferred choice?

Suitable for rotational parts. Key characteristics: the part rotates about its central axis, and its cross-section is mostly circular or annular.

Scenarios where CNC turning is the right choice

  1. The main body is a body of revolution (circular, shaft-type, disc-type or sleeve-type)

   Shafts, bushings, flanges, nuts, valve spools, axles, fishing-reel shafts, stepped shafts, rings and threaded sleeves.

   Turning relies on workpiece rotation plus tool feed. It is highly efficient for external diameters, bores, faces, tapers, radii/arcs, knurling and internal/external threads.

  1. High requirements for concentricity, roundness and radial runout

   For example, mating shafts, bearing sleeves and sealing rings. A single setup can ensure that the internal and external diameters are concentric. With a standard 3-axis machining centre, it is difficult to maintain concentricity consistently on rotational parts, and the cost is higher.

  1. Medium-to-high volume rotational parts where stability and efficiency matter

   A slant-bed CNC lathe can be equipped with automatic bar feeding (bar feeder). Aluminium, copper, C45 steel and stainless steel bar stock can be machined directly, with short cycle times per part — well suited to long-term repeat orders.

  1. Continuous external profiles, tapers, spherical surfaces and arc contours are required

   Smooth curved rotational profiles (spherical surfaces, arc-shaped valve spools) are easy to produce on a CNC lathe using G-code contouring. A CNC machining centre is much slower for this type of surface.

  1. The raw material is round bar or tube

   Aluminium bar, copper bar and stainless steel tube can be cut off and machined directly on the lathe, giving high material utilisation.